SPECIFICATIONS FOR Litter Receptacles
October, 2003
Product Description  
Specifications are subject to change without notice.
Typical Applications:
- Educational Institutions
- Municipal Spaces
- Health Care Facilities
- Malls
- Government Buildings
- Libraries
- Cruise Ships
- Museums
- Restaurants/Lounges
- Hospitality
Litter Receptacle materials:
Recor™ Recycled Slats: 3/4” X 2” Recycled solid surface by-products
Recor™ uses solid surface by-products as filler in the acrylic based material. Our patented process produces a familiar material in warm colors with a renewable surface. This acrylic based material functions beautifully in both inside and outside use and the acrylics provide a cleanable, stain-resistance surface. Now you can specify Recor™ as your material of choice for benches, litter receptacles, chairs or tabletops. The rich warm color of Recor™ does not fade. It does not splinter or crack. Because Recor™ is made from a non-porous material in nature it means that it will not support mildew, or the growth of mold and bacteria.
Top: ASTM A36 Steel or 304 Stainless Steel
Top Opening: 14 Gauge Spun metal top with a 10" diameter opening with holes to allow rainwater to drain outside the liner. Side Opening: 14 Gauge Spun metal top supported by 3/8" diameter wires.
Side Opening with Ash Pan:
Top and Bottom Rings: Steel or Stainless Steel 1 1/2" Diameter Tube 14 Gauge
Frame: Steel or Stainless Steel 1/4" X 1 1/2"
X 1 1/2" metal angle
Glides: Injection Molded ABS/Nylon Glides
Fasteners: # 12 X 3/4" Pan Head Stainless Steel Sheet metal Screws
Stainless Steel Wire Mesh: 0.148" X 1/2" Opening
Liner: 36 and 44 gallon capacity liners are molded from a linear medium density polyethylene.
Weight: Urethane encapsulated concrete disk
Installation: Litter Receptacles are shipped assembled and ready for installation. No other hard wares are included.
Dimensions: 28”D x 34”H – Top Opening
28”D x 41”H – Side Opening
Mounting options:
F – Freestanding
S - Surface mount
Finishes:
Steel: Finish on steel is with a superb protective powder coat process that includes a rust inhibitor, an architectural primer coat, and a thermosetting polyester powder coat that is UV and chip resistant.
Stainless Steel: Bead Blast or powder coat |
